The Studica Robotics 60mm OD round groove D-shaft pulley is for use with your robotics design builds.

The Studica Robotics 60mm OD round groove 6mm hex pulley is for use with your robotics design builds.

The Studica Robotics 60 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 100mm Drive Wheel (4"), with a 12.5mm axial width can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.  Use with 1/2" hex shaft or use a 6mm Shaft Hub to connect to 6mm D-Shaft axles.

The Studica Robotics 40 Tooth GT2-6mm Timing Belt D-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 810mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

Specifications:

• type: GT2 open-loop
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The Studica Robotics 30 Tooth D-Shaft Gear is ideal for use with robotics design builds.

The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

The Studica Robotics Servo Spline Gear is a 30-Tooth Gear with a 25-Tooth Spline. It is used with the Multi-Mode Smart Servo or Multi-Mode Smart Servo 200.

The Studica Robotics 6mm D-Shaft Face Bearing Block can be mounted on any channel and bracket allowing for a 6mm ID through hole for 6mm shafts (axles). The block has a permanently installed Standard Sealed Bearing and has 8 x M3 tapped through holes for easy mounting.

The Studica Robotics 24 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.

The Studica Robotics 10-tooth Pulley includes two 5mm Bores, two 10-Tooth Aluminum Pulleys and one 1M XL Timing belt.

The Studica Robotics 6mm D-Shaft Hub (4 pack) is used to connect any Studica wheel and/or motor with a 6mm shaft.

The Studica Robotics 6mm Hex-Shaft Hub (4 pack) is used to connect any Studica wheel and/or motor with a 6mm shaft.

The Studica Robotics 40 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 30 Tooth Hex-Shaft Gear is ideal for use with robotics design builds.

The Studica Robotics FTC Power Block is a game-changer in facilitating seamless power connections for various devices throughout your FTC robot.

The Studica Robotics 30 Tooth GT2-6mm Timing Belt D-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 630mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The Studica Robotics 30 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.

The Studica Robotics 100mm (4") orange Flex Wheel with an axial width of 25mm and a durometer of 40A can be used for intake systems and conveyors.

The Studica Robotics 100mm (4") blue Flex Wheel with an axial width of 25mm and a durometer of 50A can be used for intake systems and conveyors.

The Studica Robotics 100mm (4") black Flex Wheel with an axial width of 25mm and a durometer of 60A can be used for intake systems and conveyors.

Made of aluminum, the Studica Robotics Clamping 6mm D-Shaft Hub is used with flex and drive wheels.

The Studica Robotics Light Weight 6mm D-Shaft Hub (2 pack) are used with 6mm D shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

The Studica Robotics 20 Tooth GT2-6mm Timing Belt D-Shaft Pulley can be used with any of the GT2 belts. 

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 330mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The Studica Robotics Intake D-Shaft Hub Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Can be used with the Silicone Rubber Tubing #76410 (sold separately).

The Studica Robotics 12 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.

The Studica Robotics Clamping 6mm D-Shaft Hub - v2 is used with flex and drive wheels and is improved for the absolute strongest hold.