Motion
Motion Components for Robotics
Explore robotics motion components from Studica Robotics.
50mm OD Round Groove Pulley
The Studica Robotics 50mm OD round groove pulley is for use with your robotics design builds.
GT2 Timing Belt, 2mm Pitch, 6mm width, 190mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 190mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
Mecanum Wheel L (left Slant - 100mm - w/6mm Hub)
The Studica Robotics100mm left-slant Mecanum Wheel is constructed with a blue aluminum frame with yellow rollers and a 6mm Hub. The wheel is comprised of 9 rollers, able to move in any direction. The rollers are set at 45° to the axis of rotation of the wheel.
Mecanum Wheel R (Right Slant - 100mm - w/6mm Hub)
The Studica Robotics100mm right-slant Mecanum Wheel is constructed with a blue aluminum frame with yellow rollers and a 6mm Hub. The wheel is comprised of 9 rollers, able to move in any direction. The rollers are set at 45° to the axis of rotation of the wheel.
Servo Power Block
The Studica Robotics Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels. The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables.
100mm Drive Wheel, 50A, 12.5mm wide, 1/2" Inner Hex, Blue
The Studica Robotics 100mm Drive Wheel (4"), with a 12.5mm axial width can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with 1/2" hex shaft or use a 6mm Shaft Hub to connect to 6mm D-Shaft axles.
100mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue
The Studica Robotics 100mm Drive Wheel (4") with an axial width of 25mm, can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with 1/2" Hex Shaft or 6mm Shaft Hub to use connect 6mm D-Shaft Axles.
100mm Flex Wheel, 35A, 25mm wide, 1/2" Inner Hex, Green
The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.
100mm Flex Wheel, 40A, 25mm wide, 1/2" Inner Hex, Orange
The Studica Robotics 100mm (4") orange Flex Wheel with an axial width of 25mm and a durometer of 40A can be used for intake systems and conveyors.
60mm OD Round Groove Pulley
The Studica Robotics 60mm OD round groove pulley is for use with your robotics design builds.
GT2 Timing Belt, 2mm Pitch, 6mm width, 240mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 240mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
Servo Arm Extended
The Studica Robotics Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
100mm Flex Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue
The Studica Robotics 100mm (4") blue Flex Wheel with an axial width of 25mm and a durometer of 50A can be used for intake systems and conveyors.
20 Tooth GT2-6mm Timing Belt Pulley
The Studica Robotics 20-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts.
GT2 Timing Belt, 2mm Pitch, 6mm width, 1000mm Open, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
Specifications:
- type: GT2 open-loop
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
Servo Arm
The Studica Robotics Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.