Electronics
Electronics
Electronics are fundamental components in your robotics design, providing computational power and the control systems necessary for your robots to function autonomously.
Analog Module with JST-SH to JST-GH Cable
Studica Robotics Analog Module with JST-SH to JST-GH Cable. This is used with the Cobra Line Follower Sensor to make it easier to connect.
Remote Control Device - USB & Bluetooth
The Remote Controller is optimized for use on many different platforms. Connect with the included USB cable or in Bluetooth mode. Includes a built-in gyroscope, accelerometer, and 3.5mm Stereo interface for headphones and microphones.
3D Depth Camera
The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.
On/Off Power Switch - 20A 125VAC
A 20A, 125VAC on/off panel mount snap-in power switch for use with Studica Robotics design builds. DPST Rocker Switch, UL, CSA rated.
Expansion Hub Encoder Cable
This cable is designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.
Cypher MAX Through Bore Encoder
This versatile rotary sensor offers a comprehensive solution for measuring both relative and absolute positions. Thanks to its ABI quadrature output and absolute position pulse output capabilities, this odometry sensors helps your robot gain pinpoint accuracy know exactly where it is. The encoder is thoughtfully designed with a standard 3/8-inch Hex Through Bore, complete with strategically placed mounting holes to seamlessly integrate into various multi-channel systems.
Enhancing its adaptability further, the Cypher MAX package includes interchangeable inserts, allowing you to effortlessly convert the 3/8-inch hex to a 6mm D-Shaft, 5mm hex, or 7mm hex, providing you with exceptional flexibility for your application needs.
Great for use in an FTC Odometry system along with our 38mm omni wheel.
38mm Omni Wheel
The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.