Close
Main Categories
    Filters
    Preferences
    Search

    Multi-Mode Smart Servo 200 - FAST

    The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    MFR Part #: 75007
    $24.99
    Availability: In stock

    RESOURCES - 3D CAD Files - STEP

    Specifications:

    Type Steel Gear, Metal Bearings
    Weight 65g
    Gear Ratio 1/300
    Output Shaft Style 25 Tooth Spline (5.9mm)
    Voltage Range 4.8V ~ 7.4V
    No-Load Speed (6.0V) 0.046 sec/60° (215 RPM)
    No-Load Speed (7.4V) 0.038 sec/60° (260RPM)
    Stall Torque (6.0V) 5.0 kg.cm (69.5 oz-in)
    Stall Torque (7.4V) 8.0 kg.cm (111.2 oz-in)
    No-Load Current (6.0V) 130mA
    No-Load Current (7.4V) 150mA
    Stall Current (6.0V)  2.7A
    Stall Current (7.4V)  3.7A
    Max PWM Range (Default) 500 - 2500μsec
    Operating Travel (Default) 300°
    Pulse Amplitude 3-5V
    Rotating Direction CounterClockwise 
    Deadband Width 4μsec
    Motor Type Brushed DC
    Feedback Style 5KΩ Potentiometer
    Output Shaft Support Dual Ball Bearing
    Gear Material Steel
    Wire Length 70cm
    Wire Gauge 22 AWG
    Connector Type 3-Pos TJC8 Servo Connector [MH-FC]
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    RESOURCES - 3D CAD Files - STEP

    Specifications:

    Type Steel Gear, Metal Bearings
    Weight 65g
    Gear Ratio 1/300
    Output Shaft Style 25 Tooth Spline (5.9mm)
    Voltage Range 4.8V ~ 7.4V
    No-Load Speed (6.0V) 0.046 sec/60° (215 RPM)
    No-Load Speed (7.4V) 0.038 sec/60° (260RPM)
    Stall Torque (6.0V) 5.0 kg.cm (69.5 oz-in)
    Stall Torque (7.4V) 8.0 kg.cm (111.2 oz-in)
    No-Load Current (6.0V) 130mA
    No-Load Current (7.4V) 150mA
    Stall Current (6.0V)  2.7A
    Stall Current (7.4V)  3.7A
    Max PWM Range (Default) 500 - 2500μsec
    Operating Travel (Default) 300°
    Pulse Amplitude 3-5V
    Rotating Direction CounterClockwise 
    Deadband Width 4μsec
    Motor Type Brushed DC
    Feedback Style 5KΩ Potentiometer
    Output Shaft Support Dual Ball Bearing
    Gear Material Steel
    Wire Length 70cm
    Wire Gauge 22 AWG
    Connector Type 3-Pos TJC8 Servo Connector [MH-FC]
    Customers who bought this item also bought

    Multi-Mode Smart Servo

    #75002
    $23.99
    (In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    I2C to I2C 3pin female to female cable, 22WAG

    #71012
    $10.00
    (In stock)

    Clamping Shaft Hub

    #76281
    $7.99
    (In stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 

    Light Weight Shaft Hub - 2 Pack

    #76282-2
    $7.99
    (In stock)

    Studica Robotics Light Weight Shaft Hubs are used with the 6mm D shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm D Shaft ID
    • M3 tapped hole pattern for connecting to structure
    • Step File 

    Enhanced Wheel Hub Kit

    #76291
    $14.99
    (In stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File

    6mm D-Shape Collar Clamp

    #76320
    $4.99
    (In stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.

     

    Step File

    30 Tooth GT2-6mm Timing Belt Pulley

    #76451
    $8.99
    (In stock)

    The 30 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

     

    Specifications:

    • 30 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    40 Tooth GT2-6mm Timing Belt Pulley

    #76452
    $9.99
    (In stock)

    The 40 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

     

    Specifications:

    • 40 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    60 Tooth GT2-6mm Timing Belt Pulley

    #76453
    $10.99
    (In stock)

    The 60 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

     

    Specifications:

    • 60 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File