Made from aluminum and anodized in blue, the Studica Robotics 42mm Hinge with Bearings connects to the Studica structure hole pattern such as the channel, plates, and beams. The holes are 3.2mm diameter to use with the M3 screws.
-Â Meet the Studica Robotics Building System
- Studica Robotics for FTC Teams Flyer
- Classroom Robotics Kit Flyer
- FTC Starter Kit 2023-24 parts list
- WorldSkills Lyon 2024 Mobile Robotics Collection - Parts List
- Worldskills Mobile Robotics 2023 Parts List
- Mobile (Autonomous) Robotics VMX/Titan Workshop Kit - Parts List
Software Install:
WPILib Online Install
Link:Â https://dev.studica.com/releases/2023/NavX.json
WPILib Offline Install, once downloaded, read the instructions on where to extract the contents from the NavX-Offline-2023-0-3-Readme.txt file.
User Guide:
View NavX2-MXP User Guide
· 450mm Length
· 3 position
· TJC8 MH-FC on one end
· TJC8 FH-MC on the other end
· Twisted cable
· Colors: White, Red, Black (red in middle)
· 24AWG Guage
A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.
150mm Blue Zip Tie, 100 pack, can be used for wire management.
Specifications:
The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.
The Studica Robotics 336mm Low Profile U-Channel is 3mm thick and has a 48mm x 14mm profile.
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
The Studica Robotics 48mm Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.
The Studica Robotics Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch. Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.
The Studica Robotics 100mm (4") blue Flex Wheel with an axial width of 25mm and a durometer of 50A can be used for intake systems and conveyors.