Close
Main Categories
    Filters
    Preferences
    Search

    Industry

    View as Grid List
    Sort by
    Display per page

    TinkerKit Hall Sensor module

    #T000070
    $6.82

    TinkerKit Hall Sensor module creates a voltage related to the magnetic field around the sensor. This can be used to detect distance from a nearby magnet. Hall sensors can also be used to detect the magnetic field induced in a wire or coil.

    TinkerKit Sensor Shield V.2

    #T020010
    $11.93

    TinkerKit Sensor Shield V.2 allows you to hook up the TinkerKit Sensors and Actuators directly to the Arduino without the use of the breadboard. It has 12 standard TinkerKit 3 pin connectors.

    TinkerKit Tilt Sensor module

    #T000190
    $4.01

    TinkerKit Tilt Sensor module can detect when it is at an angle. This module contains two contacts and a small metal ball. When the sensor is in its upright position, the ball bridges the two contacts, completing the circuit. When the board is tilted, the ball moves, and the circuit opens. When upright, the module outputs 5V and when it is tilted, it outputs 0V. When connected to an input on the Arduino using the TinkerKit Shield, you can expect to read a value of 1023 when in its upright position and 0 when it is titled.

    This module is sensor. The connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.

    Titan Quad Motor Controller

    #70152
    $399.00

    The Titan Quad Motor Controller is a powerful, 4-channel CAN-based motor controller with a built-in fuse-box (for DC motors up to 20A).

    Features:

     

    • 4 x Hardware encoder ports – one for each motor
    • 2 limit switch ports for each motor
    • Fuse box to set manual current limits
    • 2x Power extension ports to power other 12VDC devices. I.E.
      • VMX Robotics Controller
      • Servo Power Module
    • Built in LED Controller
    • 6A power supply for LED’s
    • i2c communication port to control LED Controller
    • USB ports are updated to USB-C to better support todays cable standards
    • Step File
       

    Toolkit Wires [100cm] module

    #T020080
    $2.00

    Toolkit Wires [100 cm] module are 100 cm long wires designed for TinkerKit with a 3 pin jumper on both sides to easily connect your TinkerKit products.

    Tormach 1100M CNC MILL - Entry Package

    #37752-EP
    Request a Quote

    The Tormach 1100M is a compact 3-axis CNC mill. The 1100M Entry Package has the basics that you will need to get started. This package includes mill, controller, and owners kit.

    Tormach 1100M CNC MILL - Premium Package

    #37752-PP
    Request a Quote

    The Tormach 1100M is a compact 3-axis CNC mill. This package adds an automatic tool changer, digitizing probe, and electronic tool setter.

    Tormach 1100M CNC MILL - Standard Package

    #37752-STP
    Request a Quote

    The Tormach 1100M is a compact 3-axis CNC mill. Adds a power drawbar, an enclosure, and an automatic oiler on top of the 1100M Starter Pack.

    Tormach 1100M CNC MILL - Starter Package

    #37752-SP
    Request a Quote

    The Tormach 1100M is a compact 3-axis CNC mill. The 1100M Starter Package has everything you need to get started. Comes with a mill, stand, tooling, and PathPilot console.

    Tormach 1100M Stand

    #37325
    Request a Quote

    The 1100M Stand is a heavy-duty, welded steel stand for the 1100M CNC mill that includes chip tray and coolant tank.

    Tormach 15L Slant-Pro Automation Package

    #34444-AP
    Request a Quote

    The Tormach 15L Slant-PRO® is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts. The 15L Slant-PRO® is loaded with features and options, including standard conversational control, rigid tapping, and configurable tooling and work holding.

    The 15L Slant-PRO Automation Package was configured by Tormach’s technical experts to simplify and automate your part production. It includes the Automatic Collet Closer for 15L Slant-PRO, Deluxe Lathe Tool Starter Kit, EZ-Puller bar puller, Gang Tool Starter Kit, and Lathe Turret.

    Tormach 15L Slant-Pro CNC Lathe with Turret

    #34444
    Request a Quote

    The Tormach 15L Slant-PRO™ is a compact CNC slant-bed lathe designed for prototyping and light production work. With highly customizable workholding, rigid tapping support, and a host of configurable options and upgrades, the Tormach 15L Slant-Pro is a multipurpose CNC lathe for the small shop.

    • Cast iron frame
    • 15" Swing over bed diameter
    • Onboard Conversational Programming Interface
    • Native 5C Spindle. A removable taper insert provides up to 1.53" spindle bore
    • D1-4 Spindle Nose; accepts D1-4 cam-lock lathe chucks
    • Extra Long 24.5" Carriage; Supports QC Tool Post, Gang, and Turret Tooling
    • Rigid Tapping Support
    • 3500 RPM Spindle
    • 12 mos. factory warranty

    Tormach 15L Slant-Pro Deluxe Education Package

    #34444-DEP
    Request a Quote

    The Tormach 15L Slant-PRO® is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts. The 15L Slant-PRO® is loaded with features and options, including standard conversational control, rigid tapping, and configurable tooling and work holding.

    The 15L Slant-PRO Deluxe Education Package was configured by Tormach’s technical experts for career development and classroom settings in mind with programs ready to invest in the future of its students. It includes an expanded set of tools needed to foster an educational environment, such as an 8-station turret, and a full enclosure.

    Tormach 15L Slant-Pro Education Package

    #34444-EP
    Request a Quote

    The Tormach 15L Slant-PRO® is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts. The 15L Slant-PRO® is loaded with features and options, including standard conversational control, rigid tapping, and configurable tooling and work holding.

    The 15L Slant-PRO Education Package was configured by Tormach’s technical experts with career development and classroom settings in mind. It includes a variety of tools needed to foster an educational environment, such as the Quick Change Tool Post Kit, and a full enclosure.

    Tormach 15L Slant-Pro Gang Turn Package

    #34444-GT
    Request a Quote

    The Tormach 15L Slant-PRO® is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts. The 15L Slant-PRO® is loaded with features and options, including standard conversational control, rigid tapping, and configurable tooling and work holding.

    The 15L Slant-PRO Gang Turn Package was configured by Tormach’s technical experts for production-level machinists looking to add more accurate and repeatable tool changes to small parts production. It includes the comprehensive Gang Tool Starter Kit, a 5C collet closer and other necessities for gang toolholding.

    Tormach 15L Slant-Pro Tool Room Package

    #34444-TR
    Request a Quote

    The Tormach 15L Slant-PRO® is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts. The 15L Slant-PRO® is loaded with features and options, including standard conversational control, rigid tapping, and configurable tooling and work holding.

    The 15L Slant-PRO Lathe Tool Room Package was configured by Tormach’s technical experts for new or expanding shops in mind. It includes the most popular options and accessories, such as a Quick Change tool post and other options.

    Tormach 15L Slant-Pro Turret Package

    #34444-TP
    Request a Quote

    The Tormach 15L Slant-PRO® is a compact slant bed CNC Lathe designed for prototyping and specialty manufacturing of turned parts. The 15L Slant-PRO® is loaded with features and options, including standard conversational control, rigid tapping, and configurable tooling and work holding.

    The 15L Slant-PRO Lathe Turret Package was configured by Tormach’s technical experts for shop gearing up to add automated manufacturing. It includes an 8-station turret, a full enclosure, and other necessities for turret toolholding systems, such as a coolant nozzle designed for turrets.

    Tormach 770M CNC MILL - Entry Package

    #38251-EP
    Request a Quote

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. This package includes mill, controller, and owners kit.

    Tormach 770M CNC MILL - Premium Package

    #38251-PP
    Request a Quote

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. This package adds automatic tool changer, passive probe, and electronic tool setter.

    Tormach 770M CNC MILL - Standard Package

    #38251-STP
    Request a Quote

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. This package includes everything from the starter package and adds a power drawbar, an enclosure, and an automatic oiler.

    Tormach 770M CNC MILL - Starter Package

    #38251-SP
    Request a Quote

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. The Starter Package for the 770M has everything you need to get started. Comes with a mill stand, tooling, and PathPilot console.

    Tormach Basic 3 Piece Indicator Set

    #31947
    Request a Quote

    Basic 3 Piece Indicator Set includes Dial Test Indicator, Dial Indicator, and Universal Magnetic Base.

    • Dial Test Indicator: .0005" Graduation, 0-15-0 Reading, Automatic Reversal, 0.098" Contact Ball, Dovetail Mount, 7/32" and 1/4" Stems.
    • Dial Indicator: .001" Graduation, 3/8" Stem, interchangeable contact point with 4-48 thread
    • Universal Magnetic Base: 3D Rigid Steel Arm Movement, 130lbs holding force, Central Locking Mechanism, 2" x 2.5" Base Bimension.

    Tormach PathPilot Controller

    #35286
    Request a Quote

    PathPilot Controller for Tormach PCNC 1100 Mill, PCNC 770 Mill,PCNC 440 Mill and 15L Slant-PRO Lathe.

    Tormach PCNC 440 CNC Mill - Entry Package

    #37236-EP
    Request a Quote

    The PCNC 440 Base Machine includes CNC mill and owner's kit.