A zinc-plated, M3 x 12mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A Studica Robotics #25 - 40 tooth sprocket for use with robotics design, made of 6061-T6 aluminum.
A Studica Robotics 2-pack of #25 - 24 tooth sprockets for use with robotics design, made of 6061-T6 aluminum.
A 2-pack of #25 - 32 tooth sprockets for use with robotics design, made of 6061-T6 aluminum.
This cable is designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.
· 450mm Length
· 3 position
· TJC8 MH-FC on one end
· TJC8 FH-MC on the other end
· Twisted cable
· Colors: White, Red, Black (red in middle)
· 24AWG Guage
The Studica Robotics M3 T-Slot Nut 100 pack, is a Hammer Head Series 20, used with any M3 screw and fits the Studica T-Slot Extrusion.
The Studica Robotics #25 Chain and Sprocket Pack includes a #25 chain, a variety of sprockets, bronze bushings, shaft hubs, spacers, screws, collars and a chain breaker tool, ideal for your robotics designs.
The Studica Robotics Pro Gear Pack includes 13, 26 and 30 tooth bevel gears, rack & pinion, shaft hubs and socket head cap screws, ideal for your robotics designs.
The Studica Robotics Gear Pack includes 32, 64 and 128 tooth gears, D-shaft hubs and socket head cap screws, ideal for your robotics designs.
The Studica Robotics Fastener Pack includes socket head cap screws, kep nuts, nyloc nuts, a screwdriver and a wrench, ideal for your robotics designs.
A zinc-plated, M3 x 8mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 30mm Socket Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 20mm Socket Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 10mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 10mm Button Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.
A pack of 100 Studica Robotics M3 Kep Nuts for use with robotics design.
