Windstream Permanent Magnet DC Generator - Current: 1.5A continuous, 2.5A max

Name: Windstream Permanent Magnet DC Generator - Current:1.5A continuous,2.5A max
SKU: 443540
Price: 85.00 USD
Availability: InStock
Rating: 5.0 (1 reviews)

Be the first to review this product

The Windstream Permanent Magnet DC Generator delivers up to 2.5A of power and is ideal for hands-on energy conversion experiments in classrooms, STEM labs, and educational kits.

1.5A - CONTINUOUS DUTY
2A - 15 minute run time
2.5A -10 minute run time

Clearance item: Limited quantities available

MFR Part #: 443540

$85.00

Regular: $170.00

In stock

Qty:

Overview
Reviews

Magnets: Two high-energy saturated C8 ceramic magnets.
Shaft: Steel 8mm (5/16") diameter, 38mm length, with 1mm full-length flat.
Armature: 12-slot armature 42mm diameter wound with AWG30 magnet wire (fusing current:10 amps).
Brushes: Replacement stock no. 443731 - $ 30.25 per set
Bearings: Two double-sealed 26mm OD ball bearings
Rotation: The red or white output wire is positive for clockwise rotation from the shaft end. Can use Full Wave Bridge to rotate in either direction if required.
Speed: Zero to 5,000 rpm (84 Hertz)- generates at all speeds
OUTPUT DEPENDS ON LOAD APPLIED
Mounting: Four M4 holes on the front or rear end caps, or by hose clamps on the magnet drum.
Weight: 1.5Kg (3.3lb) Shipping weight 1.9Kg (4lb), dimensions 150x150x300mm (6x6x12in).
Resistance: Internal resistance 21 ohms. Inductance 40mH.
Performance: See performance curves below
Generators are not weather proof and must be enclosed if outside.

-item is not returnable

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Magnets: Two high-energy saturated C8 ceramic magnets.
Shaft: Steel 8mm (5/16") diameter, 38mm length, with 1mm full-length flat.
Armature: 12-slot armature 42mm diameter wound with AWG30 magnet wire (fusing current:10 amps).
Brushes: Replacement stock no. 443731 - $ 30.25 per set
Bearings: Two double-sealed 26mm OD ball bearings
Rotation: The red or white output wire is positive for clockwise rotation from the shaft end. Can use Full Wave Bridge to rotate in either direction if required.
Speed: Zero to 5,000 rpm (84 Hertz)- generates at all speeds
OUTPUT DEPENDS ON LOAD APPLIED
Mounting: Four M4 holes on the front or rear end caps, or by hose clamps on the magnet drum.
Weight: 1.5Kg (3.3lb) Shipping weight 1.9Kg (4lb), dimensions 150x150x300mm (6x6x12in).
Resistance: Internal resistance 21 ohms. Inductance 40mH.
Performance: See performance curves below
Generators are not weather proof and must be enclosed if outside.

-item is not returnable