Close
Main Categories
    Filters
    Preferences
    Search

    myParts Kit from Texas Instruments: Companion Parts Kit for NI myDAQ

    Get your students quickly involved in building essential electronic circuits using myParts Kit supported by the Texas Instruments® University Program. The set of key components in the myParts Kit encourages hands-on experimentation with breadboards of basic circuitry, helping to make learning productive and enjoyable for beginners and more advanced students alike. Hobbyists and independent developers will also find the kit useful for investigating their design concepts. The kit comes with a collection of parts that are the building blocks of all electronics, including op-amps, an instrumentation amplifier, a comparator, voltage regulators, switching regulators, digital logic gates, timers, temperature sensors, data converters, transistors, resistors, capacitors, LEDs, switches, a wiring kit and more. myParts Kit enables your students to run experiments that help them understand real-life applications in areas such as power management, audio amplification, spinning motors, light detection, signal conditioning, data acquisition, and telecommunications to name a few.

     

    MFR Part #: 6002-240-001
    $95.00
    Availability: 45 in stock

     

    myParts Kit can help get your students ready to launch specialized advanced projects in renewable energy, bio-medical and robotics and automation, to name only a few applications. For these systems, students can turn to the wide portfolio of semiconductor products that TI offers, including microcontrollers, processors, wireless connectivity solutions, power management, data conversion, amplifiers, and logic. Many of the analog devices are supported by educational kits available through TI's University Program, such as the Analog System Lab Kit PRO, which helps you learn the essential analog building blocks of an electronics system.

    Features:
    Op-amps:

    • Op-amp: TL072CP
    • Op-amp: TL074CN
    • Op-amp: LF356
    • Op-amp: LM741C
    • Instrumentation Amp: INA217
    • Comparator: LM311P

    Regulators:

    • 1.5A boost/buck/inverting switching regulator: MC34063AP
    • Voltage regulator: LM317 (TO-220)

    Logic ICs:

    • NAND: triple 3 input (SN74LS10N)
    • NAND: quad 2 input (SN74LS00N)
    • OR: quad 2 input (SN74LS32N)
    • XOR: quad 2 input (SN74LS86N)
    • NOR: quad 2 input (SN74LS02N)
    • AND: quad 2 input (SN74LS08N)
    • Inverter buffer/driver: SN74LS04N Hex
    • Counter, 4-bit: SN74LS163N
    • Dual JK flip-flop: SN74LS107AN
    • D type dual flip-flop: SN74LS74N
    • Decoder/encoder/mux: CD4511BE
    • 3 to 8 decoder/demux: SN74LS138N
    • 8 to 3 encoder: SN74LS148
    • Dual complementary pair/inverter: CD4007UB
    • Timer: TLC555CP

    Converters:

    • Freq to V converter: LM2917N/NOPB
    • A/D converter, 12-bit: ADS7816P
    • A/D converter: ADS7822P
    • D/A converter, 12-bit: TLV5616CP

    Diodes:

    • Zener diode: 1N4735
    • Small signal diode: 1N3064
    • Fast switching diode: 1N914B
    • 1A Shottky diode: 1N5819
    • 1A rectifier diode: 1N4001
    • Infrared receiver diode
    • Infrared emitter diode

    Resistors:

    • ¼ W, 1.1 Ω, ±5%
    • ¼ W, 2.2 Ω, ±5%
    • ¼ W, 10 Ω, ±5%
    • ¼ W, 47 Ω, ±5%
    • ¼ W, 68 Ω, ±5%
    • ¼ W, 100 Ω, ±5%
    • ¼ W, 150 Ω, ±5%
    • ¼ W, 200 Ω, ±5%
    • ¼ W, 220 Ω, ±5%
    • ¼ W, 330 Ω, ±5%
    • ¼ W, 470 Ω, ±5%
    • ¼ W, 680 Ω, ±5%
    • ¼ W, 1 kΩ, ±5%
    • ¼ W, 1.5 kΩ, ±5%
    • ¼ W, 2.2 kΩ, ±5%
    • ¼ W, 3.3 kΩ, ±5%
    • ¼ W, 4.7 kΩ, ±5%
    • ¼ W, 5.6 kΩ, ±5%
    • ¼ W, 10 kΩ, ±5%
    • ¼ W, 15 kΩ, ±5%
    • ¼ W, 20 kΩ, ±5%
    • ¼ W, 22 kΩ, ±5%
    • ¼ W, 33 kΩ, ±5%
    • ¼ W, 47 kΩ, ±5%
    • ¼ W, 68 kΩ, ±5%
    • ¼ W, 100 kΩ, ±5%
    • ¼ W, 200 kΩ, ±5%
    • ¼ W, 470 kΩ, ±5%
    • ¼ W, 1 MΩ, ±5%
    • ¼ W, 10 MΩ, ±5%

    Power Resistors:

    • 10W, 6.8 Ω, ±5%

    Potentiometers:

    • ¾ W, 1 kΩ, ±10%: 3006P-102
    • ¾ W, 10 kΩ, ±10%: 3006P-103
    • ¾ W, 100 kΩ, ±10%: 3006P-104

    Ceramic Capacitors:

    • 39 pF (x2)
    • 100 pF (x2)
    • 1 nF (x2)
    • 2.2 nF (x2)
    • 4.7 nF (x2)
    • 10 nF (x4)
    • 47 nF (x2)
    • 100 nF (x2)

    Electrolytic Capacitors:

    • 1 uF, 50V (x2)
    • 4.7uF, 50V (x2)
    • 10 uF, 50V (x2)
    • 22 uF, 25V (x2)
    • 47 uF, 25V (x2)
    • 220 uF, 25V, ±20% (x1)
    • 470 uF, 25V, ±20% (x2)

    Transistors:

    • P-channel MOSFET (x4): ZVP2110A
    • NPN transistor (x3): 2N3904L
    • PNP transistor (x3): 2N3906L
    • NPN bipolar power transistor: TIP31C
    • PNP bipolar power transistor: TIP32C
    • N-channel power MOSFET: IRF510
    • Compl. transistor pair: STD815CP40 or STD830CP40
    • Dual NPN high voltage transistors: STD845DN40 or STD840DN40

    LEDs:

    • Red (x2)
    • Yellow (x2)
    • Green (x2)

    Misc:

    • Audio transformer
    • Photocell buzzer
    • Light sensor
    • Wiring kit
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

     

    myParts Kit can help get your students ready to launch specialized advanced projects in renewable energy, bio-medical and robotics and automation, to name only a few applications. For these systems, students can turn to the wide portfolio of semiconductor products that TI offers, including microcontrollers, processors, wireless connectivity solutions, power management, data conversion, amplifiers, and logic. Many of the analog devices are supported by educational kits available through TI's University Program, such as the Analog System Lab Kit PRO, which helps you learn the essential analog building blocks of an electronics system.

    Features:
    Op-amps:

    • Op-amp: TL072CP
    • Op-amp: TL074CN
    • Op-amp: LF356
    • Op-amp: LM741C
    • Instrumentation Amp: INA217
    • Comparator: LM311P

    Regulators:

    • 1.5A boost/buck/inverting switching regulator: MC34063AP
    • Voltage regulator: LM317 (TO-220)

    Logic ICs:

    • NAND: triple 3 input (SN74LS10N)
    • NAND: quad 2 input (SN74LS00N)
    • OR: quad 2 input (SN74LS32N)
    • XOR: quad 2 input (SN74LS86N)
    • NOR: quad 2 input (SN74LS02N)
    • AND: quad 2 input (SN74LS08N)
    • Inverter buffer/driver: SN74LS04N Hex
    • Counter, 4-bit: SN74LS163N
    • Dual JK flip-flop: SN74LS107AN
    • D type dual flip-flop: SN74LS74N
    • Decoder/encoder/mux: CD4511BE
    • 3 to 8 decoder/demux: SN74LS138N
    • 8 to 3 encoder: SN74LS148
    • Dual complementary pair/inverter: CD4007UB
    • Timer: TLC555CP

    Converters:

    • Freq to V converter: LM2917N/NOPB
    • A/D converter, 12-bit: ADS7816P
    • A/D converter: ADS7822P
    • D/A converter, 12-bit: TLV5616CP

    Diodes:

    • Zener diode: 1N4735
    • Small signal diode: 1N3064
    • Fast switching diode: 1N914B
    • 1A Shottky diode: 1N5819
    • 1A rectifier diode: 1N4001
    • Infrared receiver diode
    • Infrared emitter diode

    Resistors:

    • ¼ W, 1.1 Ω, ±5%
    • ¼ W, 2.2 Ω, ±5%
    • ¼ W, 10 Ω, ±5%
    • ¼ W, 47 Ω, ±5%
    • ¼ W, 68 Ω, ±5%
    • ¼ W, 100 Ω, ±5%
    • ¼ W, 150 Ω, ±5%
    • ¼ W, 200 Ω, ±5%
    • ¼ W, 220 Ω, ±5%
    • ¼ W, 330 Ω, ±5%
    • ¼ W, 470 Ω, ±5%
    • ¼ W, 680 Ω, ±5%
    • ¼ W, 1 kΩ, ±5%
    • ¼ W, 1.5 kΩ, ±5%
    • ¼ W, 2.2 kΩ, ±5%
    • ¼ W, 3.3 kΩ, ±5%
    • ¼ W, 4.7 kΩ, ±5%
    • ¼ W, 5.6 kΩ, ±5%
    • ¼ W, 10 kΩ, ±5%
    • ¼ W, 15 kΩ, ±5%
    • ¼ W, 20 kΩ, ±5%
    • ¼ W, 22 kΩ, ±5%
    • ¼ W, 33 kΩ, ±5%
    • ¼ W, 47 kΩ, ±5%
    • ¼ W, 68 kΩ, ±5%
    • ¼ W, 100 kΩ, ±5%
    • ¼ W, 200 kΩ, ±5%
    • ¼ W, 470 kΩ, ±5%
    • ¼ W, 1 MΩ, ±5%
    • ¼ W, 10 MΩ, ±5%

    Power Resistors:

    • 10W, 6.8 Ω, ±5%

    Potentiometers:

    • ¾ W, 1 kΩ, ±10%: 3006P-102
    • ¾ W, 10 kΩ, ±10%: 3006P-103
    • ¾ W, 100 kΩ, ±10%: 3006P-104

    Ceramic Capacitors:

    • 39 pF (x2)
    • 100 pF (x2)
    • 1 nF (x2)
    • 2.2 nF (x2)
    • 4.7 nF (x2)
    • 10 nF (x4)
    • 47 nF (x2)
    • 100 nF (x2)

    Electrolytic Capacitors:

    • 1 uF, 50V (x2)
    • 4.7uF, 50V (x2)
    • 10 uF, 50V (x2)
    • 22 uF, 25V (x2)
    • 47 uF, 25V (x2)
    • 220 uF, 25V, ±20% (x1)
    • 470 uF, 25V, ±20% (x2)

    Transistors:

    • P-channel MOSFET (x4): ZVP2110A
    • NPN transistor (x3): 2N3904L
    • PNP transistor (x3): 2N3906L
    • NPN bipolar power transistor: TIP31C
    • PNP bipolar power transistor: TIP32C
    • N-channel power MOSFET: IRF510
    • Compl. transistor pair: STD815CP40 or STD830CP40
    • Dual NPN high voltage transistors: STD845DN40 or STD840DN40

    LEDs:

    • Red (x2)
    • Yellow (x2)
    • Green (x2)

    Misc:

    • Audio transformer
    • Photocell buzzer
    • Light sensor
    • Wiring kit
    Customers who bought this item also bought

    NI myRIO Starter Accessory Kit

    #783068-01
    $164.99

    NI myRIO Starter Accessory Kit Contents

    • Barrel connector with leads
    • Assorted capacitors
    • Diodes
    • 7-segment display
    • Mechanical rotary encoder
    • Photo interruptor (light sensor with LED) 
    • Assorted op-amps
    • Assorted LEDs 
    • Small DC motor (1 VDC to 3 VDC, no load speed: 6600 rpm) 
    • Microphone with audio jack
    • MXP Breadboard Accessory
    • Potentiometer (500 k?) 
    • Relay
    • Assorted resistors
    • Piezoelectric sensor
    • Photocell
    • 2 Hall effect sensors (latch and switch) 
    • Buzzer
    • Assorted switches (DIP, slide, and rotary) 
    • Thermistor (NTC: 10 k?, 25 degrees) 
    • Assorted transistors
    • Force sensing resistor
    • Wire kit

    NI myRIO Embedded Student Design Device

    #782693-01
    $578.00
    (In stock)

    The National Instruments myRIO-1900 is a portable reconfigurable I/O (RIO) device that students can use to design control, robotics, and mechatronics systems.

    Breadboard and Jumper Wire Kit

    #9880WK
    $10.95
    (31 In stock)
    This NI Breadboard is a 830 tie point breadboard that comes with a 70 piece jumper wire set designed for use with National Instruments myDAQ portable data acquisition device.

    myDAQ with NI LabVIEW and Multisim - (For Students Only)

    #781327-01
    $249.97
    (In stock)
    National Instrument's NI myDAQ - Student with NI LabVIEW, and Multisim, is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.  (Only for sale to students in the USA).
     
    (Special offer - optional myDAQ accessory myGRID for NI myDAQ - an AC power grid that will help you to investigate the components of a power grid, availble as a bundled purchase only, while supplies last).

    myDAQ - Hardware only - For Students

    #781325-01
    $219.94
    (In stock)

    myDAQ - National Instrument's NI myDAQ is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.  (Only for sale to students in the USA).

     

    (Special offer - optional myDAQ accessory myGRID for NI myDAQ - an AC power grid that will help you to investigate the components of a power grid, availble as a bundled purchase only, while supplies last).

    NI Circuit Design Suite - Student Edition - Multisim Download

    #779897-35
    $62.95
    (In stock)

    NI Circuit Design Suite combines Multisim 14.3 and Ultiboard software, to offer students a complete set of tools for circuit design, simulation, validation, and layout. The Circuit Design Suite helps you design circuits using intuitive and cost-effective tools.

    Note: (Only for sale to Students & Faculty in the USA for lab preparation on personal computers, not for classroom or institutional use.)