Countersunk Screw is designed for the users who don't want the head of screw appears. Please use it with d=3mm cross screwdriver. Suitable for the structures with 3mm holes.

The IR controller is designed to wirelessly control robots and other mechanical device. Working with many common IR receiver, this IR controller provides you a simple and easy way to control your devices without touching it

Makeblock T6 L256mm Lead Screw and Brass Flange Nut Set can be self-locking, it is suitable for high torque requirements of transmission, such as the aixs for 3D printer. The lead screw also can carry larger load than the threaded rod.

Description:

36mm planetary gear reducing motor have better performance, higher torque. It can be used as the power motor of carts chassis or some high-performance small cars.

Makeblock 3D Printer nozzle Bracket A is designed specially for use as the bracket for a 3D Printer nozzle. This component is made from 6061 aluminum with a design for proper mounting and room for the nozzle extrusion. It has a high load capacity and is easy to mount.

The Makeblock 42BYG Stepper Motor Bracket B has the same function as 42BYG Stepper Motor Bracket. It comes with a width of 40mm to adapt to your DIY project.

The Makeblock ?4 straight throttle valve is a flow control valve of straight-through type which is used for reducing and controlling the flow rate, regulated by hand and can be locked and closed completely.

One end is used with ?6 air pipe and the other end with ?4 air pipe. The channel is of straight-through type and reduces the ?6 air pipe to ?4 air pipe.

Features:

• Reduce the 8mm air pipe to 6mm diameter air pipe.

The Makeblock 8mm - 6mm reducing straight connector's one end is used with 8mm air pipe and the other end with 6mm air pipe. The channel is of straight-through type and reduces the 8mm air pipe to 6mm air pipe.

Makeblock air pump motor - DC 12V/370-02PM is widely used for aquarium tank oxygen circulate, a DIY project to fit your needs.

Makeblock air pump motor - DC 12V/3202PM is widely used for aquarium tank oxygen circulate, it can also be used for a DIY project that you dream up.

Makeblock Bracket P1 is a convenient fastener. These specially designed brackets help create connections within your maker project. They are compatible with most Makeblock motion and structural parts.

Brass Stud M4 x 12 + 6 are reliable components for your maker design. These studs are durable and versatile; perfect for any project you can come up with. They are also compatible with most Makeblock parts.

Brass Stud M4 x 16 are reliable parts for your maker design. These studs are durable and versatile; perfect for any project you can come up with. They are also compatible with most Makeblock components.

Brass Stud M4 x 20 are reliable parts for your maker design. These studs are durable and versatile; perfect for any project. They are also compatible with most Makeblock components.

Brass Stud M4 x 32 are reliable parts for your maker design. These studs are durable and versatile with a length of 32mm. They are also compatible with most Makeblock components.

Brass Stud M4 x 8 + 6 are reliable components for your maker design. These studs are durable and versatile; perfect for any project you can come up with. They are also compatible with most Makeblock parts.

CNC Motor Bracket is specially designed for fixing 555 High-speed CNC Motor on your projects. With the 4mm through holes on this bracket, you are able to connect it to other Makeblock parts to create projects.

Makeblock Copper Washer (4* 10 * 1mm) has an inner diameter of 4mm, outer diameter of 10mm and a thickness of 1mm. Copper washer is brass-material-made and has features of high precision, smoothness, good wear resistance and rust resistance. It can be used in all DIY projects.

Makeblock Cuttable Linkage 080 is used as the link parts in DIY designs, such as 3D printer, link structure and other structures in Makeblock.

Features:

• Made from 6061 aluminum, 2mm thick, anodized surface.
• With holes on 8mm increments,  can be drilled for 4mm hardware.
• Can be cut into short size as you like.
• Sold in Packs of 10.

 This is the single spiral groove of flexible coupling made by aluminum. This design utilizes a single piece of material and becomes flexible by removal of material along a spiral path resulting in a curved flexible beam of helical shape.Changes to the lead of the helical beam provide changes to misalignment capabilities as well as other performance characteristics such as torque capacity and torsional stiffness. It is even possible to have multiple starts within the same helix.                                                

Features:

• Made of tainless Steel
• Can drill into 4mm holes. Compatible with Thread Drive Beam
• Lengh: 288mm
• Sold in 4-Pack

Features:

• Made of stainless steel.
• Can drill into 4mm holes.
• Compatible with thread drive beam.
• Lengh: 240mm

This shaft of 8 mm in diameter and 272mm in length is suitable for using as shaft, supporting part, or using with slide units in motion applications. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance.

Features:

• With M4 thread holes on both ends
• Round steel shaft for using as shaft, supporting part, or using with slide units in motion applications
• Chrome plated for corrosion resistance
• Case hardened for wear resistance

• Made from 6061 aluminum, 2mm thick, anodized surface.
• With holes on 8mm increments,  can be drilled for 4mm hardware.
• Sold in pack of 10.

M4 plain washer is generally used together with with M4 bolts and nuts to reduce the pressure intencity and protect the beam surface.

Specifications:

• Type: Plain Washer
• Material: Steel 
• Thickness: 0.4 mm 
• Outer diameter: 9.0 mm 
• Inner diameter: 4.2 mm

M8 elastic washer is generally used together with with M8 bolts, which will not get loose in vibrating.

Specifications:

• Type: Elastic Washer
• Material: Steel 
• Thickness: 2.2 mm 
• Outer diameter: 12.7 mm 
• Inner diameter: 8.3 mm

M8 plain washer is generally used together with with M8 bolts and nuts to reduce the pressure intencity and protect the beam surface.

Specifications:

• Type: Plain Washer
• Material: Steel 
• Thickness: 1.5 mm 
• Outer diameter: 15.7 mm 
• Inner diameter: 8.4 mm

The Makeblock Me 4 Button can be used in a variety of projects. The Me 4 Button can work as function button or direction button to control your robots. There are 4 momentary buttons on the PCB board which have a great “click” to them. They all share an analog output and different analog values reflect different buttons. You can easily connect it to Me BaseBoard V1.0 or Me BaseShield V2.0 by 6 Pin RJ25 cable.