12V 3000mAh NiMH Battery Pack PP45 ARES

The Studica Robotics 12V 3000 mAh NiMH (nickel metal hydride) Battery Pack, PP45 - ARES in Black comes with a w/20 amp fuse. It is a 10-cell, 12-volt rechargeable battery pack.

The Studica Robotics NiMH Battery Pack Charger, PP45 ARES, is required to charge the battery.

Note: This battery is legal for FIRST (FTC) competitions.

MFR Part #: 70025

$49.99

Also Recommended

add NiMH Battery Pack Charger, PP45, ARES [+$34.99 per item]
Enter quantity:
add XT30 Female to Anderson Powerpole 45 Cable [+$6.49 per item]
Enter quantity:
add On/Off Power Switch Kit [+$14.99 per item]
Enter quantity:

In stock

Qty:

Overview
Reviews

Specifications:

Voltage: 12V DC
Capacity: 3000 mAh
Type: NiMH
Weight: 604g
Wire Gauge: 16 AWG
Connector: Anderson PP45 in ARES Orientation
Built-in Fuse: 20A ATM
Max Discharge Rate: 10C
Max Charge Rate: 1C
Wire Length: 150mm

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Also Purchased

XT30 Female to PP45 Cable

#70195

$6.49

(In stock)

An XT30 Female to Anderson Powerpole 45 Cable for connecting a battery to a REV control hub.

NiMH Battery Pack Charger PP45 ARES

#70026

$34.99

(In stock)

The Studica NiMH Battery Pack Charger, PP45, ARES is used to recharge the 12V 3000 mAh NiMH Battery Pack - PP45 ARES.

Clamping 6mm Hex-Shaft Hub

#76281H

$7.99

(In stock)

The Studica Robotics Clamping 6mm Hex-Shaft Hub is used with flex and drive wheels and is improved for the absolute strongest hold.

50mm Drive Wheel, 40A, 25mm wide, 1/2" Inner Hex, Orange

#76268

$6.99

(In stock)

The Studica Robotics 50mm (2") orange Drive Wheel with a durometer of 40A can be used as a simple wheel providing good traction on carpet and tile flooring. The drive wheel can also be used for intake systems and with 1/2" hex shafts or 6mm Shaft Hubs to connect 6mm D-Shaft Axles.

Inside L Bracket (Blue)

#76089

$3.59

(In stock)

Inside U-Bracket (Blue)

#76086

$4.99

(In stock)

42mm Hinge with Bearings

#76312

$7.49

(In stock)

Made from aluminum and anodized in blue, the Studica Robotics 42mm Hinge with Bearings connects to the Studica structure hole pattern such as the channel, plates, and beams. The holes are 3.2mm diameter to use with the M3 screws.