Close
Menu
(0) Items
You have no items in your shopping cart.
(0) Quote
You have no items in your shopping cart.
Menu
Shopping Cart
Filters
Preferences
Search
PrevServo Manager
NextMulti-Mode Smart Servo Moto...
Picture of Multi-Mode Smart Servo 200 - FAST

Multi-Mode Smart Servo 200 - FAST

Be the first to review this product

The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

MFR Part #: 75007
$28.99
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
In stock

RESOURCES - STEP Files

 

Mechanical Specs

Size 40mm x 20.1mm x 38.3mm x 54mm
Gear Ratio 1/300
Weight 64g
Gear Type Steel
Bearing Dual Ball Bearings
Spline 25T
Case Nylon & Fiberglass
Connector Wire 750mm ± 5mm (White, Red, Black)
Connector Type 3-Pos TJC8 Servo Connector [MH-FC]
Motor Metal Brush Motor
Wire Length 70cm
Wire Gauge 22 AWG
Water Resistance No

 

 

 

 

 

 

 

 

 

 

 

 

 

Electrical Specs

Voltage 4.8V 6.0V
Idle Current 5mA 7mA
No Load Speed 0.057sec/60° (175 RPM) 0.046sec/60° (217RPM)
Running Current 120mA 130mA
Stall Torque 47.2oz-in 69.5oz-in
Stall Current 2200mA 2700mA

 

Control Specs

Command Signal Pulse Width Modulation
Amplifier Type Digital Comparator
Pulse Width Range 500μS ~ 2500μS
Neutral Position 1500μS
Range of Motion 300° ± 5°
Dead band width 4μS
Rotating Direction CW

 

Enviromental Conditions

Storage Temperature -30°C ~ 80°C
Operating Temperature -15°C ~ 70°C

 

Standard Enviroment

Temperature 25°C ± 5°C
Humidity 65% ± 10%
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

RESOURCES - STEP Files

 

Mechanical Specs

Size 40mm x 20.1mm x 38.3mm x 54mm
Gear Ratio 1/300
Weight 64g
Gear Type Steel
Bearing Dual Ball Bearings
Spline 25T
Case Nylon & Fiberglass
Connector Wire 750mm ± 5mm (White, Red, Black)
Connector Type 3-Pos TJC8 Servo Connector [MH-FC]
Motor Metal Brush Motor
Wire Length 70cm
Wire Gauge 22 AWG
Water Resistance No

 

 

 

 

 

 

 

 

 

 

 

 

 

Electrical Specs

Voltage 4.8V 6.0V
Idle Current 5mA 7mA
No Load Speed 0.057sec/60° (175 RPM) 0.046sec/60° (217RPM)
Running Current 120mA 130mA
Stall Torque 47.2oz-in 69.5oz-in
Stall Current 2200mA 2700mA

 

Control Specs

Command Signal Pulse Width Modulation
Amplifier Type Digital Comparator
Pulse Width Range 500μS ~ 2500μS
Neutral Position 1500μS
Range of Motion 300° ± 5°
Dead band width 4μS
Rotating Direction CW

 

Enviromental Conditions

Storage Temperature -30°C ~ 80°C
Operating Temperature -15°C ~ 70°C

 

Standard Enviroment

Temperature 25°C ± 5°C
Humidity 65% ± 10%
Customers who bought this item also bought
Picture of Multi-Mode Smart Servo Motor

Multi-Mode Smart Servo Motor

#75002
$28.99

The Studica Robotics Multi-Mode Smart Servo Motor is a versatile, programmable servo perfect for robotics and STEM projects. Featuring steel gears, dual ball bearings, and modes including standard (±150°), continuous rotation, and custom angular, it delivers high torque and flexibility. Fully FTC-legal, the servo is ideal for competition, classroom or hobbyist use.

 

Note: This servo motor is legal for FIRST Tech Challenge (FTC) competitions.

Picture of 6mm D-Shaft Collar Clamp

6mm D-Shaft Collar Clamp

#76320
$4.99

The Studica Robotics 6mm D-shaft collar clamp cay be used with the 6mm D-Shape Shaft to secure wheels in their position.

 

 

Servo Arm

#76151
$6.49

The Studica Robotics RC Servo Arm can be used with the Multi Mode Smart Servo, Multi Mode Smart Servo 200, or most servos with a 25 Tooth gear.

M3 x 10mm Low Profile Screw with Kep Nut (6 pack)

#76199-6
$3.49

The M3 x 10mm low profile screw with Kep Nut is a 304 Stainless Steel M3 Din 7991 countersunk hex socket flat head screw with a matching Kep Nut. This package is made for the Slide Rail, 288mm Length, 180mm Stroke and the Slide Rail, 384mm Length, 240mm Stroke

Servo Hub Pro

#76152
$6.49

The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.

Clamping Shaft Hub

Clamping 6mm D-Shaft Hub

#76281
$7.99

Made of aluminum, the Studica Robotics Clamping 6mm D-Shaft Hub is used with flex and drive wheels.

Picture of Light Weight 6mm D-Shaft Hub - 2 Pack

Light Weight 6mm D-Shaft Hub - 2 Pack

#76282-2
$7.99

The Studica Robotics Light Weight 6mm D-Shaft Hub (2 pack) are used with 6mm D shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

Picture of Enhanced D-Shaft Wheel Hub Kit

Enhanced D-Shaft Wheel Hub Kit

#76291
$16.49

The Studica Robotics enhanced D-shaft wheel hub kit is ideal for use with the Omni and Mecanum wheels for a strong axle hold.

Related products
Picture of 6mm D-Shaft Servo Hub 25T

6mm D-Shaft Servo Hub 25T

#76149
$6.49

The Studica Robotics 6mm D-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axle.

6V DC Battery Holder, for Smart Robot Servo Programmer

#75004
$4.99

Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector. 

Specifications:

  • 6V Output
  • On/Off Power switch
  • TJC8 connector
  • Uses 4 x 1.5V AA Batteries (not included)
Picture of Multi-Mode Smart Servo Motor

Multi-Mode Smart Servo Motor

#75002
$28.99

The Studica Robotics Multi-Mode Smart Servo Motor is a versatile, programmable servo perfect for robotics and STEM projects. Featuring steel gears, dual ball bearings, and modes including standard (±150°), continuous rotation, and custom angular, it delivers high torque and flexibility. Fully FTC-legal, the servo is ideal for competition, classroom or hobbyist use.

 

Note: This servo motor is legal for FIRST Tech Challenge (FTC) competitions.

Picture of Servo Horn 25T

Servo Horn 25T

#76148
$4.39

The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica Robotics building structure components.

 

 

Picture of Servo Mount Flat Plate

Servo Mount Flat Plate

#76145
$7.59

The Studica Robotics Servo Mount Flat Plate is designed to mount the Multi-Mode Smart Servo (part #75002) to the Studica building structure.

 

Picture of Servo Mount Offset Plate

Servo Mount Offset Plate

#76146
$7.99

The Studica Robotics Servo Mount Offset Plate is used to mount the Multi-Mode Smart Servo (part #75002) to the Studica building structure.

 

Servo Pack

#70254
$369.00

The Studica Robotics Servo Pack is a complete servo motor and hardware bundle designed for robotics builders, educators, and competition teams. This all-in-one set includes eight multi-mode smart servo motors, a smart robot servo programmer, a 6 V battery holder, a servo power block, multiple servo mounting plates, servo horns, and 6 mm D-shaft servo hubs — giving you everything you need to integrate servos into robot mechanisms, linkages, and control systems.

Picture of Servo Power Block

Servo Power Block

#75006
$36.99

The Servo Power Block is a 6V, 60W power injector that provides proper power for RC Servos. It does not interfere with the signal, it will only replace the power to the servo with 6V. 

 

Note: This servo power block is legal for FIRST (FTC) competitions.

Servo Standard Front

#76144
$5.99

The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

 

Smart Robot Servo Programmer

#75003
$12.99

The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo motors to switch between continuous mode, standard mode, or any custom angular mode.  

 

Specifications:

  • Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
  • Programming setting modes
    • Standard
    • Continuous
    • Angular
Information
Customer service
My account
Contact Info
Copyright © 2026 Studica. All rights reserved.