PWM cable Set - TJC8 3 pin, 22AWG, F-F - 12 pcs

The Servo Power Block is a 6V, 60W power injector that provides proper power for RC Servos. It does not interfere with the signal, it will only replace the power to the servo with 6V. 

Note: This servo power block is legal for FIRST (FTC) competitions.

The Studica Robotics XT30 Male to JST-VH cable is used to connect the Servo Power Block (75006) tothe FTC Power ecosystem. The cable can be used to connect the FTC Power block to Servo Power Block and the Servo Power Block to REV Control Hub.

The Studica Robotics Servo Power Block (75006) with the XT30 Male to JST-VH Cable (70180) Bundle is made for FIRST FTC Teams. The Servo Power Block is a 6V, 60W power injector that provides proper power for RC Servos. It does not interfere with the signal, it will only replace the power to the servo with 6V.  The XT30 Male to JST-VH Cable allows you to plug directly into the REV Control Hub.

Note: This servo power block is legal for FIRST (FTC) competitions.

The Studica Robotics 12V 3000 mAh NiMH (nickel metal hydride) Battery Pack, PP45 - ARES in Black comes with a w/20 amp fuse. It is a 10-cell, 12-volt rechargeable battery pack.  

The Studica Robotics NiMH Battery Pack Charger, PP45 ARES, is required to charge the battery. 

Note: This battery is legal for FIRST (FTC) competitions.

The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

The Studica Robotics Multi-Mode Smart Servo Motor is a versatile, programmable servo perfect for robotics and STEM projects. Featuring steel gears, dual ball bearings, and modes including standard (±150°), continuous rotation, and custom angular, it delivers high torque and flexibility. Fully FTC-legal, the servo is ideal for competition, classroom or hobbyist use.

Note: This servo motor is legal for FIRST Tech Challenge (FTC) competitions.

The Maverick 12V DC Gear Motor 61:1 w/Encoder from Studica Robotics is an ideal high torque motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.

To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.

Note: This motor is legal for FIRST (FTC) competitions.

The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica Robotics building structure components.