30MHz Dual Trace

Vertical Amplifiers(CH1 and CH2)
Sensitivity:
5mV/div - 5V/div(x1 mode)
1mV/div - 1V/div(6Mhz, -3dB) (x5 mode)
 

Attenuator:
1-2-5 sequences, 10-step attenuator, plus vernier control
 Rise Time: About 14ns
Over Shoot: Less than 5%
Input Impedance: 1MΩ ±2%, 25pf ±10pF
Max. Input Voltage: 400V (DC + AC peak)
Operating Modes: CH 1, CH 2, Dual(ALT or CHOP), and ADD
Chop Frequency: Approximately 500kHz
Algebraic addition: CH 1 + CH 2, CH 1 - CH 2
Inverter: CH 2 only
 

Horizontal Amplifier
X-Y mode: Switch selectable using X-Y switch
  CH 1: X-axis
  CH 2: Y-axis
Accuracy:  Y-axis ±3%, X-axis ±6%


Bandwidth: DC - 1MHz(-3dB)
X-Y phase difference:  Approximately 3º at 50kHz.
 

Other Specifications    
CRT: TYPE: Rectanglular with internal graticule. 
      Display Area:  8 x 10 div (1 div = 1 cm)
      Accelerating Voltage: 2.1kV
      Phosphor: P31
Trace Rotation: Adjustable front panel
Calibrator: Square wave 1kHz, 2Vpp ±3%
Power Requirements:115, 223VAC ±10%, 50/60Hz

Power Consumption: Approximately 40 watts
Supplied Accessories: Two x1, x10 probes, schematic diagram & parts list, AC Power cord, spare fuse and dust cover
 

Sweep System
Sweep Display Mode:  Main, Mix
Hold Off Time:  5:1 continuously variable
 

Main Sweep
Sweep Speed: 0.1us/div - 0.2s/div in 1-2-5 sequence 20 steps
Accuracy: ±3%
Variable Time Control:
5:1, uncalibrated, continuously variable between steps.
Sweep Magnification: 10X, ±10%, extend sweep speed up to 10ns/div


Trigger
Trigger Coupling: AUTO, NORM, TV-V, TV-H
Trigger Source: CH 1, CH 2, LINE, EXT
Slope: ±
 

Trigger Sensitivity
Coupling                    Bandwidth                        Internal                        External
TV-V                            20Hz - 1kHz                        0.5 div                        0.05Vpp
TV-H                           1kHz - 100kHz                    0.5 div                        0.05Vpp
AUTO                          100Hz - 30MHz                  1.5 div                        0.1Vpp
NORM                        DC - 30MHz                        1.5 div                        0.1Vpp