Studica Robotics
 |
 |
 |
Everything You Need to Build, Learn & Compete
Studica Robotics is an open, comprehensive robotics building platform with everything you need to build, learn, and compete.
FIRST®Teams: View FTC Starter Bot Resource Guide 2026-2027. Shop FTC robotics solutions. Shop FRC robot parts.
Build Better Robots®
Our wide selection of durable robot parts and robotics kits are ideal for classroom use, robot competitions, robotics team training, and more. We offer a variety of colored structure and motion components, electronics, hardware, and building kits, you'll find everything you need to build and empower your robot with cutting-edge capabilities. Discover your true building potential with Studica Robotics.
 |
 |
 |
50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue
The Studica Robotics 50mm (2") blue Drive Wheel with a durometer of 50A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.
Urethane 5mm Round Belt, 3m length
The Studica Robotics Urethane 5mm Round Groove Belt is 3m long and has a 10% stretch. It is also referred to as a U Groove belt.
6mm x 140mm D-Shaft (6 pack)
The 6mm x 140mm D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.
25mm Male to Female Standoff (12 pack)
A Studica Robotics 25mm male to female (12 pack) standoff for robotics design.
Shock Absorber, 1/10 Aluminum, 55mm (2 pack)
A shock absorber (2-pack) for use with Studica Robotics design builds, made of aluminum alloy, total lenght of 63mm.
Shock Absorber, 1/10 Aluminum, 100mm (2 pack)
A Studica Robotics aluminum alloy shock absorber for use with your robotics design builds.
75mm Drive Wheel 60A 12.5mm wide 1/2" Inner Hex Black
The Studica Robotics 75mm black Drive Wheel with a durometer of 60A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with the 1/2" hex shaft or 6mm Shaft Hub to use connect 6mm D-Shaft Axles.
Rack and Pinion D-Shaft Set (2 Pack)
The Studica Robotics Rack and Pinion D-Shaft Set (2 Pack) includes 2 Racks, 2 Pinions, and 4 Glides. The rack hole mounting pattern matches that of the Studica Robotics channels, flat beams, square beams and flat brackets so it's very easy to mount onto the Studica Robotics structures.
3/8 inch x 1/5 Pitch XL Timing Belt (3ft) x open-end
3/8” wide, 1/5 pitch XL series belti. Constructed of Neoprene with Fiberglass cords for superior strength and wear resistance. Compatible XL series pinion pulley.
Hex Key Metric 7 Piece Set (1.5, 2, 2.5, 3, 4, 5, 6)
Our Metric Hex Key Set comes with 7 different sizes from 1.5mm up to 6mm. Ideal for use in building robotics assemblies for competitions.
Specifications:
- 7 color pcs
- 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm
- Non-slip handle
- ball-end and straight-end
- S2 Hardness
- Non-corrosive
- Weight: 0.118kg
JST-GH to 4 Pin Dupont Cable (4 pack)
The JST-GH to 4 Pin Dupont Cable can be used for the VMX Controller.
Studica USB and Ethernet Hub with wireless access point for myRIO
To enhance how the robot communicates with the Driver's Station in wireless mode, this kit adds an additional USB port as well as an Ethernet port to the myRIO. An access point is provided that is plugged directly into the myRIO stabilizing the wireless environment while providing protection against unwanted interference and/or malicious connections.
This kit seamlessly adds two extra USB ports and one Ethernet port to myRIO.
Includes:
- USB and Ethernet Hub for myRIO (Seamlessly adds two extra USB ports and one Ethernet port to myRIO)
- OM5P-AC Dual Band 1.17 Gbps Access Point
- Power Cable for OpenMesh Radio
Linear Servo RC Actuator 50S-190N
The Studica Robotics Linear Servo RC Actuator 50S-190N is a new linear servo motor which has a stroke of 50mm and a max force of 190N.
Note: This actuator is legal for FIRST (FTC) competitions.