• • 150mm Length
  • 3 Position
  • TJC8 FH-MC on 2 Split Ends
  • TJC8 MH-FC on single end
  • Twisted Cable
  • Colors: White, Red, Black (red in middle)
  • 24AWG Guage

This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match with various spacer lengths.

The Studica VMX FRC Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot.  The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment.  Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them! 

This affordable solution is intended for:

• FRC teams that want to learn and train on a smaller and more affordable robot,
• Schools looking for a way to teach FRC robotics in the classroom.
• Schools that want to teach coding in the classroom through robotics.

The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Robotics Controller which can be programmed in C++ and Java.  VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).

VMX-Pi Key Use Cases and Hardware/Software Features and Benefits
VMI-Pi Key Use Case Document is available here

Download BOM here

Studica accepts Purchase Orders from Schools and established companies, offering net 30 terms upon review and approval. Contact us at [email protected] for more information.

A Studica Robotics #25 - 40 tooth sprocket for use with robotics design, made of 6061-T6 aluminum.

The Studica Robotics 10mm OD round groove pulley is for use with your robot design builds.

The Studica Robotics 192mm Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. 

The Studica Robotics 192mm U-Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

The Studica Robotics 288mm L-Beam (2-pack) has a width and height of 14mm each. It is strong while light-weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates. Ideal for rapid prototyping.

The Studica Robotics 288mm Square Beam is 8mm by 8mm. 

The Studica Robotics 288mm Flat Bracket (2-pack) has a thickness of 3mm and a width of 40mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

The Studica Robotics T-Slot Extrusion is available in 10 different lengths from 48mm to 1000mm. It is strong while light-weight. It can be easily cut to your own custom size. It has a 14mm through hole that will fit the Studica 6mmID x 14mmOD Flanged Bearing or Bronze Bushing. It uses the M3 T-Slot Nut Hammer Head Series 20.  It also has four M3 threaded holes on each end. The T-slot extrusion can be used as structure with infinite applications.

The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 90 Degree Bracket is ideal for connecting two channel pieces at a 90 degree angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. 

An iCrimp open barrel crimper for use with robotics design builds.

The Studica Robotics Linear Servo RC Actuator 50S-95N is a new linear servo motor which has a stroke of 50mm and a max force of 95N.

M3 x 6mm Socket Head Cap Screw (pack of 50), Zinc Plated.

Step file